Radweld Plus
Radweld Plus
Radweld Plus is the total coolant leak repair, specially designed with an anti-corrosion formula that protects and maintains a healthy coolant system.
- Total cooling system leak repair
- Easy to use, pour and go formula
- Seals in minutes
Radweld Plus is the total coolant leak repair, specially designed with an anti-corrosion formula that protects and maintains a healthy coolant system whilst eliminating the need to drain the system.
Radweld Plus can be used at home and is simple to use; there’s no need to flush or drain the system.
Simply pour in and let Radweld Plus locate and seal the leaks.
- Total cooling system leak repair
- Easy to use, pour and go formula
- Seals in minutes
- No clogging or damaging effects
- Treats up to 21 litres
With the rising cost of car replacement parts, save yourself the money and hassle of taking your car to the garage with Radweld Plus Radiator Leak Repair.
It couldn’t be easier to repair your coolant leak with Radweld Plus – all you need to do is pour it in and let it locate and seal the leaks. It seals in minutes, with no clogging or damaging effects.
Radweld Plus is an easy to use, total cooling system leak repair. It works through your system to quickly seal leaks in:
- Radiators
- Engine blocks
- Cylinder heads
- Hoses
- Heater core
- Water pump gaskets
Solve your radiator and cooling system leaks with Radweld Plus.
Holts have been developing automotive repair products to keep you driving since 1919. Our products are developed in our UK laboratories and tested on the road.
Radweld Plus is part of our trusted Radweld range which is guaranteed to work in all vehicles without causing damage.
Name: Holts Radweld Plus 250ml
Manufacturer’s Code: RW2RGA
How to use:
Ensure that the vehicle’s engine is cool before starting the repair process. Park the vehicle in a safe and well-ventilated area.
Before using Holts Radweld Plus, shake the bottle thoroughly to ensure that the contents are well-mixed.
With the engine turned off, pour the appropriate amount of Radweld Plus directly into the radiator or coolant reservoir. Refer to the product label for the recommended dosage based on the system’s capacity.
After adding Radweld Plus, top up the cooling system with the appropriate type of coolant to the recommended level. Ensure that the radiator or coolant reservoir is filled to the specified capacity.
Start the engine and let it run for approximately 10-15 minutes to allow the Radweld Plus to circulate through the cooling system and reach the leak.
After running the engine, monitor the cooling system for any signs of leaks. Keep an eye on the previously identified leak site to see if the Radweld Plus has effectively sealed the leak. It may take some time for the sealant to fully take effect.
SDS InformationYes, you can use Holts Radweld before an MOT. A leaking radiator can be expensive to repair, and could cause your car to fail its MOT, so solving the problem at home first can be an ideal solution.
An MOT inspection is a thorough test of your vehicle’s roadworthiness, so if there are other problems with your vehicle, the MOT tester may still recommend additional work is carried out before it is passed. Using Radweld doesn’t guarantee your car will pass the MOT, but it will quickly and permanently repair leaks and help you to avoid costly radiator repairs.
We would advise checking with the provider of your warranty before attempting a repair of any type. Like all of the Holts long-term or permanent repair products, it is important to check the details of your warranty before you use them in case you risk invalidating it.
Holts Radweld is a safe and permanent way to repair your car’s radiator in minutes. Holts Radweld is designed to cause no damage and can be used without flushing the cooling system, making it easy to use on your driveway.
If your car is still under warranty, however, you should check the details and work out the best option for you before you use Radweld.
If you’re looking for a quick, easy, and cost-effective solution to a leaky radiator, look no further than Radweld. It’s one of our most popular products, and drivers have been using it for decades to repair leaks in radiators.
Radweld works its way through the system, seeking out leaks and forming permanent repairs in minutes. Radweld has been carefully formulated to mix with all engine coolant and antifreeze types, and works quickly to fill small holes and gaps, resealing the system to permanently repair leaks.
Radweld can be poured directly into the cooling system, with no need to drain or flush the system first. The product also provides anti-corrosion protection and prevents future leaks; it will last the lifetime of the coolant in the system.
Radweld permanently fixes leaks without damaging your radiator, so you can simply pour and go, and feel confident that your radiator is fixed and free from leaks. While Radweld has anti-corrosive properties, we can’t guarantee that your radiator will never need replacing, as there could be unrelated problems further down the line.
Yes, Radweld provides a permanent repair for small cracks, holes, and leaks in your car’s radiator. The solution provides a permanent, water-tight seal, so you can get back on the road without worrying about further breakdowns or expensive repair bills.
Radweld is designed to be added directly into the engine’s expansion tank. You don’t need to drain or flush the system before you use it – just pour and go. Radweld works through the radiator channels to seal leaks without any clogging or damaging effects, so all you need to do is pour it in and let it repair the leak.
When adding Radweld, it is important to ensure the engine has cooled before unscrewing the cap of the expansion tank as the coolant operates at around 90°C. After filling with Radweld, make sure that the cap of the expansion tank is replaced and tightened.
No, Radweld has been developed to ensure that it never blocks the channels in a car’s radiators.
The product is safe to use in all cars, cooling systems, and alongside any brand of coolant/antifreeze. It’s guaranteed to not cause clogging in the system, so you can use it with confidence to repair small holes and leaks.
Radweld Plus is the total coolant leak repair, specially designed with an anti-corrosion formula that protects and maintains a healthy coolant system whilst eliminating the need to drain the system.
Radweld Plus can be used at home and is simple to use; there’s no need to flush or drain the system.
Simply pour in and let Radweld Plus locate and seal the leaks.
- Total cooling system leak repair
- Easy to use, pour and go formula
- Seals in minutes
- No clogging or damaging effects
- Treats up to 21 litres
With the rising cost of car replacement parts, save yourself the money and hassle of taking your car to the garage with Radweld Plus Radiator Leak Repair.
It couldn’t be easier to repair your coolant leak with Radweld Plus – all you need to do is pour it in and let it locate and seal the leaks. It seals in minutes, with no clogging or damaging effects.
Radweld Plus is an easy to use, total cooling system leak repair. It works through your system to quickly seal leaks in:
- Radiators
- Engine blocks
- Cylinder heads
- Hoses
- Heater core
- Water pump gaskets
Solve your radiator and cooling system leaks with Radweld Plus.
Holts have been developing automotive repair products to keep you driving since 1919. Our products are developed in our UK laboratories and tested on the road.
Radweld Plus is part of our trusted Radweld range which is guaranteed to work in all vehicles without causing damage.
Name: Holts Radweld Plus 250ml
Manufacturer’s Code: RW2RGA
How to use:
Ensure that the vehicle’s engine is cool before starting the repair process. Park the vehicle in a safe and well-ventilated area.
Before using Holts Radweld Plus, shake the bottle thoroughly to ensure that the contents are well-mixed.
With the engine turned off, pour the appropriate amount of Radweld Plus directly into the radiator or coolant reservoir. Refer to the product label for the recommended dosage based on the system’s capacity.
After adding Radweld Plus, top up the cooling system with the appropriate type of coolant to the recommended level. Ensure that the radiator or coolant reservoir is filled to the specified capacity.
Start the engine and let it run for approximately 10-15 minutes to allow the Radweld Plus to circulate through the cooling system and reach the leak.
After running the engine, monitor the cooling system for any signs of leaks. Keep an eye on the previously identified leak site to see if the Radweld Plus has effectively sealed the leak. It may take some time for the sealant to fully take effect.
SDS InformationYes, you can use Holts Radweld before an MOT. A leaking radiator can be expensive to repair, and could cause your car to fail its MOT, so solving the problem at home first can be an ideal solution.
An MOT inspection is a thorough test of your vehicle’s roadworthiness, so if there are other problems with your vehicle, the MOT tester may still recommend additional work is carried out before it is passed. Using Radweld doesn’t guarantee your car will pass the MOT, but it will quickly and permanently repair leaks and help you to avoid costly radiator repairs.
We would advise checking with the provider of your warranty before attempting a repair of any type. Like all of the Holts long-term or permanent repair products, it is important to check the details of your warranty before you use them in case you risk invalidating it.
Holts Radweld is a safe and permanent way to repair your car’s radiator in minutes. Holts Radweld is designed to cause no damage and can be used without flushing the cooling system, making it easy to use on your driveway.
If your car is still under warranty, however, you should check the details and work out the best option for you before you use Radweld.
If you’re looking for a quick, easy, and cost-effective solution to a leaky radiator, look no further than Radweld. It’s one of our most popular products, and drivers have been using it for decades to repair leaks in radiators.
Radweld works its way through the system, seeking out leaks and forming permanent repairs in minutes. Radweld has been carefully formulated to mix with all engine coolant and antifreeze types, and works quickly to fill small holes and gaps, resealing the system to permanently repair leaks.
Radweld can be poured directly into the cooling system, with no need to drain or flush the system first. The product also provides anti-corrosion protection and prevents future leaks; it will last the lifetime of the coolant in the system.
Radweld permanently fixes leaks without damaging your radiator, so you can simply pour and go, and feel confident that your radiator is fixed and free from leaks. While Radweld has anti-corrosive properties, we can’t guarantee that your radiator will never need replacing, as there could be unrelated problems further down the line.
Yes, Radweld provides a permanent repair for small cracks, holes, and leaks in your car’s radiator. The solution provides a permanent, water-tight seal, so you can get back on the road without worrying about further breakdowns or expensive repair bills.
Radweld is designed to be added directly into the engine’s expansion tank. You don’t need to drain or flush the system before you use it – just pour and go. Radweld works through the radiator channels to seal leaks without any clogging or damaging effects, so all you need to do is pour it in and let it repair the leak.
When adding Radweld, it is important to ensure the engine has cooled before unscrewing the cap of the expansion tank as the coolant operates at around 90°C. After filling with Radweld, make sure that the cap of the expansion tank is replaced and tightened.
No, Radweld has been developed to ensure that it never blocks the channels in a car’s radiators.
The product is safe to use in all cars, cooling systems, and alongside any brand of coolant/antifreeze. It’s guaranteed to not cause clogging in the system, so you can use it with confidence to repair small holes and leaks.
