Narrow Metal Repair Bandage
Narrow Metal Repair Bandage
The Gun Gum Narrow Metal Repair Bandage can be adjusted to fit around the damaged area in a straight exhaust pipe.
- Suitable for use of straight pipes
- Quick and easy to use
- Flexible and adjustable
Mend any straight section of exhaust at home with Holts Gun Gum repair bandages.
The Gun Gum Narrow Metal Repair Bandage can be adjusted to fit around the damaged area. Always use together with Holts Gun Gum paste for a permanent, gas tight seal.
- Suitable for use of straight pipes (up to 20mm hole)
- Use with Gun Gum exhaust paste for a permanent repair
- Quick and easy to use
Simply apply Holts Gun Gum paste and fit the flexible Narrow Exhaust Repair bandage over the damaged area for a permanent gas tight seal in minutes.
You don’t need to dismantle your exhaust or use any special tools.
The Gun Gum range includes various products to help you repair any part of your exhaust at home.
Name: Holts Narrow Metal Repair Bandage
Manufacturer’s Code: HL2R6
How to Use:
- Clean around the hole to be repaired, removing all loose dirt & rust.
- Apply half of the Gun Gum exhaust system repair paste around the hole, using the spatula provided.
- Fit the narrow repair bandage so that the hole to be repaired in in the centre of the bandage.
- Ensure that the ends of the metal bandage overlap by at least 30mm. Any excess can be easily trimmed with a pair of scissors.
- Locate the end of the adjustable clip & attach to the nearest retaining ear. Tighten with a screwdriver.
- Use the remaining Gun Gum paste to paste to seal the ends of the bandage in place.
- Leave overnight to harden or run the engine slowly to speed up drying time. Avoid racing the engine until the paste has fully hardened.
Yes, Gun Gum is MOT approved and will help you to repair holes or damage in your exhaust before your vehicle gets tested. Using Gun Gum on a damaged exhaust could help it pass the MOT as it creates a permanent, gas tight seal. If you’re worried about your exhaust and how much it will cost to fix at a garage, Gun Gum makes it easy to repair it yourself at home.
You don’t need to dismantle the exhaust, just use Gun Gum paste or a bandage or wrap over the hole for a fast repair. You can view the full range of Gun Gum products here.
Gun Gum is a permanent repair, so you can use it before an MOT or whenever you need to fix your exhaust, knowing that the repair will last for the lifetime of your exhaust.
For more information about using Gun Gum, you can read the articles below.
We would advise that you check the details of your warranty with your provider before attempting a repair of any type. Gun Gum provides a permanent gas tight seal which is MOT approved, so it is the quickest and easiest way to repair an exhaust. However if your car is currently under warranty you should check the terms of the agreement and also investigate if the necessary exhaust repairs are covered under the warranty.
Yes, Holts Gun Gum is ideal for fixing cracked exhausts, provided the damaged part is in reasonable condition and is still fully attached. You can use Gun Gum to fix cracks on straight and curved pipes, DPFs, back boxes, and catalytic converters, with a permanent repair guaranteed.
It is completely safe to use Gun Gum on your exhaust. The product forms a gas tight seal which is solid and MOT-approved – helping to keep your vehicle on the road and operating safely and efficiently. We have a range of accessories which fit around the damaged area and, when used with Gun Gum Paste, form a safe and permanent repair. You can read more about how to find the right products to fix your exhaust here.
Our UK research and development team constantly test our products to ensure that we evolve to meet the needs of today’s vehicles.
Holts Gun Gum is one of the easiest and most effective ways to fix small holes and cracks. This specialist exhaust repair system provides a permanent, gas-tight seal for holes and cracks along the entire length of the exhaust assembly, so you don’t need to replace any parts or components.
Using Holts Gun Gum is simple, and the job can be done at home by DIYers who can safely access their car’s undercarriage (with a jack or car lifting kit). You’ll need a tub of Holts Gun Gum Paste and the right Gun Gum bandage to perform the repair – more on this later.
The Gun Gum range includes the Gun Gum Paste and a range of bandage accessories which, when used together, can fix holes across your exhaust system. The table below will help you to choose the right accessory for your problem. Always use a bandage with Gun Gum Paste for a guaranteed permanent seal.
If you have a hole in the bend of your car’s exhaust, it can be fixed using the Gun Gum Easy Fit Metal Repair Bandage with Gun Gum Paste. The bandage has been specially developed to fit around curved and bending pipes of the exhaust, to create a gas-tight seal. Like all the products in the Gun Gum range, the Easy Fit Bandage can help you to repair your exhaust easily at home to keep your car running, and even help you pass your MOT.
The adjustable wrap is fully flexible, ensuring it can be fitted to bends of all shapes and sizes to help cover holes and damage on any part of the exhaust bend. Simply fit the bandage around the damaged area, ensuring it’s fitted as tightly as possible. You can then use the Gun Gum Paste to seal any edges to make sure no gas escapes from your exhaust during driving.
Gun Gum Easy Fit Repair Bandage is a permanent repair for your exhaust that meets MOT standards and can be used easily at home. You don’t need to dismantle the exhaust, so it’s a cost-effective alternative to taking your car to a mechanic.
Mend any straight section of exhaust at home with Holts Gun Gum repair bandages.
The Gun Gum Narrow Metal Repair Bandage can be adjusted to fit around the damaged area. Always use together with Holts Gun Gum paste for a permanent, gas tight seal.
- Suitable for use of straight pipes (up to 20mm hole)
- Use with Gun Gum exhaust paste for a permanent repair
- Quick and easy to use
Simply apply Holts Gun Gum paste and fit the flexible Narrow Exhaust Repair bandage over the damaged area for a permanent gas tight seal in minutes.
You don’t need to dismantle your exhaust or use any special tools.
The Gun Gum range includes various products to help you repair any part of your exhaust at home.
Name: Holts Narrow Metal Repair Bandage
Manufacturer’s Code: HL2R6
How to Use:
- Clean around the hole to be repaired, removing all loose dirt & rust.
- Apply half of the Gun Gum exhaust system repair paste around the hole, using the spatula provided.
- Fit the narrow repair bandage so that the hole to be repaired in in the centre of the bandage.
- Ensure that the ends of the metal bandage overlap by at least 30mm. Any excess can be easily trimmed with a pair of scissors.
- Locate the end of the adjustable clip & attach to the nearest retaining ear. Tighten with a screwdriver.
- Use the remaining Gun Gum paste to paste to seal the ends of the bandage in place.
- Leave overnight to harden or run the engine slowly to speed up drying time. Avoid racing the engine until the paste has fully hardened.
Yes, Gun Gum is MOT approved and will help you to repair holes or damage in your exhaust before your vehicle gets tested. Using Gun Gum on a damaged exhaust could help it pass the MOT as it creates a permanent, gas tight seal. If you’re worried about your exhaust and how much it will cost to fix at a garage, Gun Gum makes it easy to repair it yourself at home.
You don’t need to dismantle the exhaust, just use Gun Gum paste or a bandage or wrap over the hole for a fast repair. You can view the full range of Gun Gum products here.
Gun Gum is a permanent repair, so you can use it before an MOT or whenever you need to fix your exhaust, knowing that the repair will last for the lifetime of your exhaust.
For more information about using Gun Gum, you can read the articles below.
We would advise that you check the details of your warranty with your provider before attempting a repair of any type. Gun Gum provides a permanent gas tight seal which is MOT approved, so it is the quickest and easiest way to repair an exhaust. However if your car is currently under warranty you should check the terms of the agreement and also investigate if the necessary exhaust repairs are covered under the warranty.
Yes, Holts Gun Gum is ideal for fixing cracked exhausts, provided the damaged part is in reasonable condition and is still fully attached. You can use Gun Gum to fix cracks on straight and curved pipes, DPFs, back boxes, and catalytic converters, with a permanent repair guaranteed.
It is completely safe to use Gun Gum on your exhaust. The product forms a gas tight seal which is solid and MOT-approved – helping to keep your vehicle on the road and operating safely and efficiently. We have a range of accessories which fit around the damaged area and, when used with Gun Gum Paste, form a safe and permanent repair. You can read more about how to find the right products to fix your exhaust here.
Our UK research and development team constantly test our products to ensure that we evolve to meet the needs of today’s vehicles.
Holts Gun Gum is one of the easiest and most effective ways to fix small holes and cracks. This specialist exhaust repair system provides a permanent, gas-tight seal for holes and cracks along the entire length of the exhaust assembly, so you don’t need to replace any parts or components.
Using Holts Gun Gum is simple, and the job can be done at home by DIYers who can safely access their car’s undercarriage (with a jack or car lifting kit). You’ll need a tub of Holts Gun Gum Paste and the right Gun Gum bandage to perform the repair – more on this later.
The Gun Gum range includes the Gun Gum Paste and a range of bandage accessories which, when used together, can fix holes across your exhaust system. The table below will help you to choose the right accessory for your problem. Always use a bandage with Gun Gum Paste for a guaranteed permanent seal.
If you have a hole in the bend of your car’s exhaust, it can be fixed using the Gun Gum Easy Fit Metal Repair Bandage with Gun Gum Paste. The bandage has been specially developed to fit around curved and bending pipes of the exhaust, to create a gas-tight seal. Like all the products in the Gun Gum range, the Easy Fit Bandage can help you to repair your exhaust easily at home to keep your car running, and even help you pass your MOT.
The adjustable wrap is fully flexible, ensuring it can be fitted to bends of all shapes and sizes to help cover holes and damage on any part of the exhaust bend. Simply fit the bandage around the damaged area, ensuring it’s fitted as tightly as possible. You can then use the Gun Gum Paste to seal any edges to make sure no gas escapes from your exhaust during driving.
Gun Gum Easy Fit Repair Bandage is a permanent repair for your exhaust that meets MOT standards and can be used easily at home. You don’t need to dismantle the exhaust, so it’s a cost-effective alternative to taking your car to a mechanic.
